Manual Washers
MAGIDO Manual Aqueous Parts Washers
Technical documentation for DG series sink-style, L series vat-style, and HP high-pressure manual aqueous parts washers.
Overview
Magido manual parts washers are engineered to handle the most rigorous challenges commonly found in industrial-automotive maintenance cleaning applications. Designed to use environmentally safe aqueous (water-based) cleaning solutions for safe and effective parts cleaning applications.
DG Series
Manual

The DG Series is Magido's compact sink-style manual parts washer line — a simple, durable aqueous cleaning station for everyday shop floor degreasing. Both models share a 300-lb capacity and a flo-thru brush system powered by an external magnetic drive pump, delivering heated solution directly through the bristles for effective removal of oils, coolants, and light soils. A thermostat-controlled heater and liquid level shutoff are standard. The DG-9 offers a larger basin than the DG-8 for bigger parts. The right choice for toolrooms and maintenance shops that need a low-footprint, no-frills cleaning station without the automation of a spray cabinet. Optional cartridge filter and casters available.
- AISI 304 Stainless Steel Construction
- External Magnetic Drive Pump
- Flo-Thru Brush
- Electrical Heater Controlled by a Thermostat
- Liquid Level Shut Off
Full Specifications
L Series
Manual

The L Series (Manual) offers Magido's vat-style manual aqueous parts washers — a step up from the DG sink in capacity and work area. Both models feature a deep stainless steel vat with adjustable work grate, thermostat-controlled heater, liquid level sensor, and drain valve. The L-10 provides a larger basin (29") for longer or bulkier parts than the L-7 (19"). Parts soak in heated aqueous solution and are scrubbed by hand — effective for heavy grease and packed-in contamination that needs dwell time rather than high-pressure spray. Well suited for MRO, agricultural equipment, and heavy equipment shops. Cartridge or bag filtration available.
- AISI 304 Stainless Steel Construction
- Electrical Heater with Thermostat Control
- Liquid Level Sensor
- Drain Valve
- Removable Parts Basket
Full Specifications
HP Series
Manual Cabinet

The HP Series is Magido's high-pressure manual cabinet washer line, built for applications where spray impingement is more effective than soaking. An 870 PSI piston-drive pump powers an ergonomic spray wand inside an enclosed stainless steel cabinet, with LED lighting, a viewing window, and a window-clearing blower for visibility. The HP-30 offers a larger cabinet and tank than the HP-25 at the same 350-lb capacity. Particularly effective for removing paint, carbon, rust, and baked-on grease that lower-pressure washers can't shift. Typical applications include engine rebuilding, heavy equipment repair, fleet maintenance, and MRO. Oil skimmer and external filtration available.
- Powerful (870 PSI) Piston-Drive Pump
- LED Illuminated Cabinet
- Ergonomic Spray Wand
- Window-Clearing Blower
- Thermostat Controlled Heater
- Liquid Level Sensor & Low Water Shut Off
- Removable Work Tray & Screened Filter Basket
Full Specifications