SP320 Rotary Drum Parts Washer

The Magido SP320 is a single-stage rotary drum aqueous parts washer from the Spira 1b Series, featuring a 12" diameter × 67" drum and a production rate of approximately 3.2 cubic feet per hour. Unlike the Jolly Series which uses spray-only washing, the Spira combines spray and full immersion washing in a single continuous pass — the rotating drum carries parts through a spray zone and then submerges them in the heated wash solution, providing more thorough cleaning of complex geometries. Built from AISI 304 stainless steel. The SP320 is the entry Spira 1b model suited for small parts — fasteners, turned components, and small stampings — at production volumes where the compact 12" drum is sufficient.

Drum Dia.: 12" Inches
Drum Length: 67" Inches
Pump: 3 Hp
Heater: 16 kW
Temperature: 100-160 °F
Production: 3,2 CFH
Power Supply: 460V 3ph 60Hz Volt

Spira 1b Series SP320

AISI 304 Stainless Steel Construction
Helical Auger Drum Design
Combined Submersion & Spray Cleaning
Adjustable Drum Speed
Solution Heating System
Customizable Process Zones

Compare Spira 1b Series Models

All specifications shown side-by-side for easy selection.

Specification	SP320Current	SP480	SP640	SP950
Production(CFH)	3,2	6,4	12,7	25
Drum diameter(Inches)	12"	19"	25"	37"
Drum Length(Inches)	67"	98"	98"	150"
Thread pitch(Inches)	5"	6"	8"	12"
Thread depth(Inches)	2"	3"	5"	10"
Loading height(Inches)	50"	58"	58"	76"
Unloading height(Inches)	28"	32"	32"	32"
Wash tank(gal US)	90	130	130	210
Wash pump(Hp)	3	4	4	5,5
Wash flow rate pressure(GPM / PSI)	65 / 43	90 / 43	90 / 43	105 / 50
Wash electrical heating(kW)	16	24	24	32
Steam aspirator(HP / CFM)	0.25 / 180	0.25 / 180	0.25 / 180	0.75 / 470
Electric Drying(kW)	9	15	15	24
Overall width(Inches)	55"	65"	65"	80"
Overall height(Inches)	75"	90"	90"	105"
Overall depth(Inches)	100"	140"	140"	200"

Quote SP320 Quote SP480 Quote SP640 Quote SP950

Ready to Move Forward?

Contact our team for a quote, process evaluation, or to discuss custom configurations for your specific parts cleaning application.

Request a Quote 844-462-4436

Not sure yet? Start here.

🔍

How to Choose a Parts Washer

Match machine type to your parts, contamination, and volume

⚖️

Aqueous vs. Solvent

Compare cleaning technologies side by side

🧪

Free Process Evaluation

Send us your parts — we validate the cleaning solution first