G400/2 In-Line Belt Conveyor Parts Washer

The Magido G400/2 is a dualstage inline belt conveyor parts washer from the Gold 2b Series, featuring a 16" wide belt with separate 90gallon wash and rinse tanks. The 16" belt handles a broader range of part sizes than the G200/2 and G300/2, while maintaining the residuefree output required for downstream finishing operations. Belt speed adjusts from 1–5 fpm. Built from AISI 304 stainless steel throughout with independent temperature control per tank and programmable cycles. A practical midrange dualstage choice for operations cleaning varied part sizes that need clean rinse output.

Belt Width: 16" Inches
Wash Height: 10" Inches
Wash Tank: 90 gal US
Pump: 3 Hp
Heater: 18 Kw/m
Temperature: 100-160 F
Power Supply: 460V / 3Ph / 60Hz Volt

Gold 2b Series G400/2

Durable Stainless Steel Construction
Vertical Stainless Steel Pumps
Stainless Steel Belt Conveyor
Heavy Duty Drive System With Variable Speed Control
Electric Dryer
Tank & Cabinet Insulation
Stage Isolation Curtains
Electric Heating Elements
NEMA 4 Electrical Panel With Disconnect Switch
PLC With Industrial Controls
Low Water Shut-Off & Automatic Water Fill Combination
Stainless Steel Wash Nozzles & Custom Header Manifold
Emergency Stop Button At Load & Unload Zones
Removable Chip Baskets
Lift-Off Tank Access Panels
Solution Tank Drain & Overflow
Marine Style Cleanout Doors
Steam Exhaust Fan

Compare Gold 2b Series Models

All specifications shown side-by-side for easy selection.

Specification	G200/2	G300/2	G400/2Current	G500/2	G600/2	G700/2	G800/2	G900/2	G1000/2
Available width of conveyor belt(Inches)	8"	12"	16"	20"	23"	27"	31"	35"	39"
Usable washing height(Inches)	10"	10"	10"	14"	14"	14"	14"	14"	14"
Wash Tank(gal US)	90	90	90	120	120	120	140	140	140
Rinse Tank(gal US)	90	90	90	120	120	120	140	140	140
Wash Pump(Hp)	3	3	3	4	4	4	5,5	5,5	5,5
Wash flow rate Pressure(GPM / PSI)	50 / 43	50 / 43	50 / 43	80 / 50	80 / 50	80 / 50	90 / 60	90 / 60	90 / 60
Rinse pump(Hp)	3	3	3	4	4	4	5,5	5,5	5,5
Rinse flow rate - pressure(GPM / PSI)	50 / 43	50 / 43	50 / 43	80 / 50	80 / 50	80 / 50	90 / 60	90 / 60	90 / 60
Wash electrical heating(Kw/m)	18	18	18	24	24	24	30	30	30
Rinse electrical heating(Kw/m)	12	12	12	16	16	16	18	18	18
Steam aspirature(Hp / CFM)	0.25 180	0.25 180	0.25 180	0.75 470	0.75 470	0.75 470	0.75 470	0.75 470	0.75 470
Electrical drying(Inches)	12	12	12	15	15	15	18	18	18
Overall width(Inches)	70"	70"	70"	85"	85"	85"	95"	95"	95"
Overall height(Inches)	70"	70"	70"	80"	80"	80"	85"	85"	85"

Ready to Move Forward?

Contact our team for a quote, process evaluation, or to discuss custom configurations for your specific parts cleaning application.

Request a Quote 844-462-4436

Not sure yet? Start here.

🔍

How to Choose a Parts Washer

Match machine type to your parts, contamination, and volume

⚖️

Aqueous vs. Solvent

Compare cleaning technologies side by side

🧪

Free Process Evaluation

Send us your parts — we validate the cleaning solution first