MAGIDO USA Aqueous Parts Washing Systems Product Catalog

Magido DG Series manual sink-style aqueous parts washers are engineered to handle the most rigorous challenges found in industrial and automotive maintenance parts cleaning applications. Built entirely from AISI 304 stainless steel, the DG8 and DG9 feature a foot-pedal-regulated, hand-held flow-through cleaning brush that delivers heated aqueous solution directly to the part surface.

The DG Series is the ideal entry-level professional solution for shops that need a reliable, heated, pump-driven washer with a small footprint. The external magnetic drive pump eliminates shaft seals for maintenance-free operation, while the built-in liquid level shut-off protects the heater from running dry. Both models operate on standard 115V single-phase power — no special electrical service required.

Designed to use environmentally friendly aqueous (water-based) cleaning solutions, the DG Series eliminates the hazardous waste costs associated with solvent-based sink washers while delivering superior cleaning performance at controlled temperatures up to 113°F.

The Magido L Series manual vat-style aqueous parts washers are designed for industrial and automotive shops that need to clean medium to large components that don't fit in a standard sink-style washer. The open vat design accommodates bulky assemblies, engine components, transmission cases, and other large parts that benefit from heated soak-and-scrub cleaning.

Available in two models — the L-7 (19" × 27.5" work area) and the larger L-10 (29.5" × 34" work area) — both units feature removable work shelves that allow parts to be partially or fully submerged in the heated solution. A flo-thru brush with flexible spigot lets technicians direct heated cleaning solution precisely where it's needed while scrubbing.

Like all Magido products, the L Series is built entirely from AISI 304 stainless steel and operates on standard 115V power. The magnetic drive pump and liquid level shut-off provide reliable, maintenance-light operation in demanding shop environments.

The Magido HP25 and HP30 are heated water blasting cabinets built entirely from AISI 304 stainless steel. Developed for technicians who need to dramatically reduce cleaning time, the HP Series uses a high-pressure piston-drive pump to deliver a heated aqueous cleaning solution at up to 870 PSI through an easy-to-handle spray wand — blasting away grease, carbon deposits, and industrial soils that would require extended soaking or scrubbing in a conventional washer.

The enclosed cabinet design keeps the operator and work area clean while the large LED-illuminated window and clearing blower provide excellent visibility throughout the cleaning cycle. The hinged front door with glove access port allows hands-on control of the spray wand while maintaining containment. A removable work tray and screened basket filter make cleanup quick and straightforward.

The HP Series is ideally suited for automotive shops, heavy equipment maintenance, machine shops, and any application where thorough, rapid cleaning of heavily contaminated parts is a priority. Both models support single and three-phase power and can be operated with foot pedal control for hands-free solution delivery.

The X81 Series parts washers are automatic spray jet wash systems constructed using AISI 304 stainless steel, available in three models (L-35, L-55, L-90) with turntable diameters ranging from 15" to 31". Each system features a motorized rotating turntable and swing-away spray manifold fitted with optimized V-Jet nozzles that use water pressure to thoroughly clean small to medium-sized parts without manual intervention.

X81 washers are specifically engineered to reduce labor cost without sacrificing wash performance. They are ideal for work-cell cleaning applications where the operator loads parts, starts the 60-minute programmable timer, and returns to their task while the machine works. The compact footprint makes X81 systems well-suited to machine shops, assembly lines, and automotive service facilities where floor space is at a premium.

All X81 models feature swing-away spray manifolds that allow easy loading and unloading without reaching over hot nozzles. Low noise operation and a thermostat-controlled heater (up to 140°F) make these machines a productive and operator-friendly solution for day-to-day parts cleaning.

The X51 Series is Magido's workhorse top-load spray cabinet washer for medium to large parts. Available in four models (L101, L102, L122, L152) with turntable diameters from 35" to 51", the X51 features a unique clamshell lid design that brings the jet-spray cleaning power closer to the parts for maximum wash performance. Up to two independent spray bars with 44–58 optimized V-Jet nozzles ensure complete coverage of complex geometries.

The X51 is ergonomically designed to reduce shop labor cost. The operator simply loads parts onto the automatic turntable, starts the programmable cycle, and returns to other work. The turntable's rotation continuously presents all surfaces to the spray manifolds, eliminating the need to reposition parts mid-cycle. The L152 model includes a pneumatic lid lifter as standard to safely raise the heavy lid on larger machines.

X51 machines are well suited for mid-to-high volume production cleaning of engine components, transmission parts, machined castings, and fabricated assemblies. Dual pump configurations on the L102, L122, and L152 deliver high flow rates at optimized spray pressures for thorough, efficient cleaning cycles.

The X51 HP Series combines the proven rotary turntable spray-cabinet design of the X51 with an integrated high-pressure spray wand capable of delivering 870 PSI — giving operators both automated batch-cleaning and on-demand blast cleaning in a single machine. Available in three models (L101HP, L102HP, L122HP) with turntables from 35" to 45", the X51 HP is ideal for applications that encounter heavily baked-on deposits, carbon, or tenacious industrial soils.

The standard spray manifold handles the automated rotary wash cycle, while the integrated high-pressure wand lets the operator target specific areas that need extra attention — all within the same enclosed stainless cabinet. Both the spray manifold and the high-pressure wand use the same heated aqueous solution, maintaining consistent cleaning temperature throughout.

The X51/2 Series adds a dedicated heated rinse stage to the X51 platform, providing a two-stage wash-then-rinse process controlled by Siemens PLC with Weintek HMI. Available in three models (L103, L123, L153) with turntable diameters from 35" to 50", the dual-tank design prevents cross-contamination between wash and rinse solutions — critical for applications requiring a residue-free finish.

The independent wash and rinse tanks each have their own dedicated pump, heater, and spray manifold. PLC control sequences the wash and rinse cycles automatically, while the programmable timer allows operators to fine-tune cycle times to the application. Tank insulation and auto-fill are included as standard on all X51/2 models, reducing heat loss and operator monitoring requirements.

The X51/2 is the preferred choice for precision-machined parts, medical components, electronics assemblies, and any application where cleanliness verification is required and residual detergent is not acceptable.

The FLS Series represents Magido's heavy-duty top-load platform, designed for high-capacity cleaning of large, heavy parts up to 1,500 lbs. Available in three models (FLS-30, FLS-35, FLS-45) with turntable diameters from 30" to 45", the FLS Series delivers high flow rates (up to 75 GPM) and spray pressures up to 60 PSI for demanding industrial cleaning applications.

The FLS platform is commonly specified for heavy equipment component cleaning, large casting and forging operations, agricultural equipment maintenance, and any application requiring the cleaning of very heavy or oversized components that exceed the capacity of standard top-load systems. The robust drive system handles the full rated load at a steady 7 RPM turntable speed.

The Magido X53 Series parts washers are engineered for automatic spray parts washing applications utilizing aqueous detergents at temperatures up to 160°F. The front-loading design provides easy access for loading and unloading of heavy or awkward parts without requiring the operator to lift over the machine — a significant ergonomic advantage for large components.

The X53 uses a fixed platform on which parts are placed, with a series of angled V-Jet nozzles configured on a spray ramp to optimally wash all surfaces. The motorized turntable continuously rotates parts through the spray pattern for complete coverage. The turntable removes easily from the wash system onto a mobile cart for convenient loading and unloading away from the machine.

Available in four models (L160 through L240) with turntable capacities from 43"×43" to 71"×71" and 1,500 lb load capacity on all models, the X53 is designed for heavy industrial production cleaning. All models feature Siemens PLC control with Weintek HMI touch screen, tank insulation, auto-fill, and exhaust fan as standard. Three-phase 460V power is required.

The X53/2 Series adds a full-capacity dedicated rinse stage to the X53 platform. Both the wash and rinse tanks have equal capacity and independent pump, heater, and spray systems — providing true two-stage aqueous cleaning with complete solution separation and no cross-contamination.

As with the X53, operation is based on a fixed platform with angled jet nozzles on a spray ramp, combined with an automatic motorized turntable. The turntable removes easily onto a mobile cart for convenient loading of heavy assemblies. Turntable capacity goes up to 71"×71" with an optional upgrade to 5,000 lb weight capacity.

All X53/2 models include a motor-driven exhaust fan as standard to remove steam and maintain a comfortable work environment. The Siemens PLC and Weintek HMI provide full process control, cycle logging, and fault diagnostics. This series is the premium choice for high-production environments requiring the highest levels of cleanliness and process repeatability.

The Magido Agita Series immersion parts washers use a combination of heated aqueous immersion and mechanical agitation to achieve thorough cleaning of complex parts with internal passages, blind holes, and intricate geometries that spray-based systems cannot fully reach. Parts are placed on a platform that is lowered into the heated bath, where turbulent agitation drives cleaning solution into every crevice.

Available in four models (A700 through A1300) with platform sizes from 27.6"×15.7" to 51.2"×23.6" and solution temperatures up to 170°F, the Agita Series is designed for precision cleaning of hydraulic components, fuel system parts, bearing housings, intricate machined parts, and other components that demand internal cleanliness verification.

All Agita models are controlled by Siemens PLC for programmable cycle control and process repeatability. The large fluid capacity (70–180 gallons) ensures consistent bath chemistry over extended production runs. Three-phase power is required for A900 through A1300 models.

Magido industrial rotary-auger drum wash systems are the right choice for continuous, high-volume parts cleaning operations. Parts are loaded into the hopper and augured through the machine's helical-drum processing chamber, where they are cleaned by a dual-action process: submersion flushes the inside of hollow parts while spray cleaning action cleans all exterior surfaces simultaneously.

The Jolly Series (J320, J320/2) is the compact entry-level rotary drum, ideal for small shops processing moderate volumes of small parts. The Spira 1b Series (SP320 through SP950) provides single-stage wash with integral drying for production environments. The Spira 2b Series (SP320/2 through SP950/2) adds a full rinse stage for applications requiring residue-free parts.

Every rotary drum system is customized to the customer's exact specifications with process zones that can include prewash, wash, rinse, rust prevention, blow-off, and heated drying. Drum diameters range from 8" (Jolly J210) to 37" (Spira SP950), and drum lengths from 47" to 208". All models are controlled by Siemens PLC and operate on 460V three-phase power.

Magido industrial in-line belt conveyor wash systems are the right choice for flow-through production cleaning processes. Parts are loaded onto the stainless steel conveyor belt and continuously transported through the machine's processing zones — pre-wash, wash, rinse, rust prevention, blow-off, and drying — emerging clean and dry at the discharge end, ready for the next production step.

The Silver Series (S200–S400) is the compact entry-level conveyor washer with belt widths from 8" to 16", designed for small to medium parts at moderate throughput. The Gold 1b Series (G200–G1000) provides single-stage wash with drying for production volumes, available in nine belt widths from 8" to 39". The Gold 2b Series (G200/2–G1000/2) adds a full rinse stage for applications requiring a contaminant-free finish.

Conveyor belt speeds are adjustable (0.7–5 fpm) to dial in the optimal dwell time for each cleaning application. All systems use environmentally safe aqueous cleaning solutions and are controlled by Siemens PLC. Each system is built to order and can be configured with any combination of process zones to match the exact requirements of the application.

Magido's Platinum Series industrial rotary-immersion wash systems clean parts in baskets or fixtures by rotating them through a turbulent immersion bath combined with a simultaneous spray cleaning cycle. This dual-action process — immersion turbulence driving solution into complex internal geometries while spray jets clean all exterior surfaces — makes the Platinum Series ideal for high-precision components with tight tolerances, blind holes, internal channels, and complex surface profiles.

The cleaning cycle is followed by a combination of spray and immersion rinsing, with an optional heated drying stage. Available in four models (P600/2 through P1500/2) with basket sizes from L24"×W12"×H12" to L59"×W31"×H34" and load capacities from 440 lbs to 1,500 lbs, the Platinum Series covers a broad range of production cleaning requirements.

All Platinum Series machines feature Siemens PLC with Weintek HMI for full process control, adjustable drum rotation speed (0.5–3 RPM), and a front-loading design with external loading table for safe, ergonomic loading and unloading of heavy baskets and fixtures. Three-phase 460V power is required. Each system is customized to exact specifications.